現在位置：范文先生網>范文大全>合同范本>英文合同

英文合同

時間：2023-05-13 19:52:32 合同范本我要投稿

購銷合同英文推薦度：
英文購銷合同推薦度：
英文勞務代理合同推薦度：
相關推薦

英文合同范文錦集六篇

　　在人們越來越相信法律的社會中，隨時隨地，各種場景都有可能使用到合同，它可以保護民事法律關系。擬定合同的注意事項有許多，你確定會寫嗎？下面是小編為大家收集的英文合同6篇，歡迎大家借鑒與參考，希望對大家有所幫助。

英文合同范文錦集六篇

英文合同篇1

　　出租方（甲方）lessor (hereinafter referred to as party a) ：

　　承租方（乙方）lessee (hereinafter referred to as party b) ：

　　根據國家有關法律、法規和有關規定，甲、乙雙方在平等自愿的基礎上，經友好協商一致，就甲方將其合法擁有的房屋出租給乙方使用，乙方承租使用甲方房屋事宜，訂立本合同。

　　in accordance with relevant chinese laws 、decrees and pertinent rules and regulations ,party a and party b have reached an agreement through friendly consultation to conclude the following contract.

　　一、物業地址 location of the premises

　　甲方將其所有的位于上海市_________區____________________________________的房屋及其附屬設施在良好狀態下出租給乙方___________使用。

　　party a will lease to party b the premises and attached facilities all owned by party a itself, which is located at _______________________________________ __________________________ and in good condition for_____________ .

　　二、房屋面積 size of the premises

　　出租房屋的登記面積為_________平方米（建筑面積）。

　　the registered size of the leased premises is_________square meters (gross size).

　　三、租賃期限 lease term

　　租賃期限自_______年___月___日起至_______年___月___日止，為期___年，甲方應于_______年___月___日將房屋騰空并交付乙方使用。

　　the lease term will be from _____(month) _____(day) _______(year) to ________(month) _____(day) _______(year). party a will clear the premises and provide it to party b for use before _____(month) _____(day) _______(year).

　　四、租金 rental

　　1. 數額：雙方商定租金為每月人民幣_____________元整, 乙方以___________形式支付給甲方。

　　amount: the rental will be ____________per month. party b will pay the rental

　　to party a in the form of ____________in ________________.

　　2. 租金按_____月為壹期支付；第一期租金于_______年_____月_____日以前付清；以后每期租金于每月的______日以前繳納，先付后住（若乙方以匯款形式支付租金，則以匯出日為支付日，匯費由匯出方承擔）。甲方收到租金后予書面簽收。

　　payment of rental will be one installment everymonth(s). the first installment will be paid before_______(month)______(day)__________(year). each successive installment will be paid_____________each month.

　　party b will pay the rental before using the premises and attached facilities (in case party b pays the rental in the form of remittance, the date of remitting will be the day of payment and the remittance fee will be borne by the remitter.) party a will issue a written receipt after receiving the payment.

　　3. 如乙方逾期支付租金超過十天，則每天以月租金的0.5％支付滯納金；如乙方逾期支付租金超過十五天，則視為乙方自動退租，構成違約，甲方有權收回房屋，并追究乙方違約責任。

　　in case the rental is more than ten working days overdue, party b will pay 0.5 percent of monthly rental as overdue fine every day, if the rental be paid 15 days overdue, party b will be deemed to have with drawn from the premises and breach the contract. in this situation, party a has the right to take back the premises and take actions against party b's breach.

　　五、保證金 deposit

　　1. 為確保房屋及其附屬設施之安全與完好，及租賃期內相關費用之如期結算，乙方同意于______年_____月_____日前支付給甲方保證金人民幣 _________元整，甲方在收到保證金后予以書面簽收。

　　guarantying the safety and good conditions of the premises and attached facilities and account of relevant fees are settled on schedule during the lease term, party b will pay _________to party a as a deposit before _____(month) _____(day) _______(year). party a will issue a written receipt after receiving the deposit.

　　2. 除合同另有約定外，甲方應于租賃關系消除且乙方遷空、點清并付清所有應付費用后的當天將保證金全額無息退還乙方。

　　unless otherwise provided for by this contract, party a will return full amount of the deposit without interest on the day when this contract expires and party b clears the premises and has paid all due rental and other expenses.

　　3. 因乙方違反本合同的規定而產生的違約金、損壞賠償金和其它相關費用，甲方可在保證金中抵扣，不足部分乙方必須在接到甲方付款通知后十日內補足。

　　in case party b breaches this contract, party a has right to deduct the default fine, compensation for damage or any other expenses from the deposit . in case the deposit is not sufficient to cover such items, party b should pay the insufficiency within ten days after receiving the written notice of payment from party a.

　　六、甲方義務 obligations of party a

　　1. 甲方須按時將房屋及附屬設施（詳見附件）交付乙方使用。

　　party a will provide the premises and attached facilities (see the appendix of furniture list for detail) on schedule to party b for using.

　　2. 房屋設施如因質量原因、自然損耗或災害而受到損壞，甲方有修繕并承擔相關費用的責任。

　　in case the premise and attached facilities are damaged by quality problems, natural damages or disasters, party a will be responsible to repair and pay the relevant expenses.

　　3. 甲方應確保出租的房屋享有出租的權利，反之如乙方權益因此遭受損害，甲方應負賠償責任。

　　party a will guarantee the lease right of the premises. otherwise, party a will be responsible to compensate party b's losses.

　　七、乙方義務 obligations of party b

　　1. 乙方應按合同的規定按時支付定金、租金及保證金。

　　party b will pay the rental, the deposit and other expenses on time.

　　2. 乙方經甲方同意，可在房屋內添置設備。租賃期滿后，乙方將添置的設備搬走，并保證不影響房屋的`完好及正常使用。

　　party b may decorate the premises and add new facilities with party a's approval. when this contract expires, party b may take away the added facilities which are removable without changing the good conditions of the premises for normal use.

　　3. 未經甲方同意，乙方不得將承租的房屋轉租或分租，并愛護使用該房屋如因乙方過失或過錯致使房屋及設施受損，乙方應承擔賠償責任。

　　party b will not transfer the lease of the premises or sublet it without party a's approval and should take good care of the premises. otherwise, party b will be responsible to compensate any damages of the premises and attached facilities caused by its fault and negligence.

　　4. 乙方應按本合同規定合法使用該房屋，不得擅自改變使用性質。乙方不得在該房屋內存放危險物品。否則，如該房屋及附屬設施因此受損，乙方應承擔全部責任。

　　party b will use the premises lawfully according to this contract without changing the nature of the premises and storing hazardous materials in it. otherwise, party b will be responsible for the damages caused by it

　　5. 乙方應承擔租賃期內的水、電、煤氣、電訊、收視費、等一切因實際使用而產生的費用，并按單如期繳納。

　　party b will bear the cost of utilities such as communications, water, electricity, gas, management fee etc. on time during the lease term.

　　八、合同終止及解除的規定 termination and dissolution of the contract

　　1. 乙方在租賃期滿后如需退租或續租，應提前兩個月通知甲方，由雙方另行協商退租或續租事宜。在同等條件下乙方享有優先續租權。

　　within two months before the contract expires, party b will notify party a if it intends to extend the leasehold. in this situation, two parties will discuss matters over the extension.

　　2. 租賃期滿后，乙方應在當天將房屋交還甲方；任何滯留物，如未取得甲方諒解，均視為放棄，任憑甲方處置，乙方?jīng)Q無異議。

　　when the lease term expires, party b will return the premises and attached facilities to party a within days. any belongings left in it without party a's previous understanding will be deemed to be abandoned by party b. in this situation, party a has the right to dispose of it and party a will raise no objection.

　　3. 本合同一經雙方簽字后立即生效；未經雙方同意，不得任意終止，如有未盡事宜，甲、乙雙方可另行協商。

　　this contract will be effective after being signed by both parties. any party has no right to terminate this contract without another party's agreement. anything not covered in this contract will be discussed separately by both parties

　　九、違約及處理 breach of the contract

　　1. 甲、乙雙方任何一方在未征得對方諒解的情況下，不履行本合同規定條款，導致本合同中途中止，則視為該方違約，雙方同意違約金為人民幣___________元整，若違約金不足彌補無過錯方之損失，則違約方還需就不足部分支付賠償金。

　　during the lease term, any party who fails to fulfill any article of this contract without the other party's understanding will be deemed to breach the contract. both parties agree that the default fine will be________________. in case the default fine is not sufficient to cover the loss suffered by the faultless party, the party in breach should pay additional compensation to the other party.

　　2. 若雙方在執行本合同或與本合同有關的事情時發生爭議，應首先友好協商；協商不成，可向有管轄權的人民法院提起訴訟。本合同一經雙方簽字后立即生效；未經雙方同意，不得任意終止，如有未盡事宜，甲、乙雙方可另行協商。

　　both parties will solve the disputes arising from execution of the contract or in connection with the contract through friendly consultation. in case the agreement cannot be reached, any party may summit the dispute to the court that has the jurisdiction over the matter.

　　十、其他 miscellaneous

　　1. 本合同附件是本合同的有效組成部分，與本合同具有同等法律效力。

　　any annex is the integral part of this contract. the annex and this contract are equally valid.

　　2. 本合同壹式貳份，甲、乙雙方各執一份。

　　there are 2 originals of this contract. each party will hold 1 original(s).

　　3. 甲、乙雙方如有特殊約定，可在本款另行約定：

　　other special terms will be listed bellows:

　　__________________________________________________________________________________

　　甲方：

　　party a

　　證件號碼：

　　id no

　　聯絡地址：

　　address

　　電話：

　　tel:

　　代理人：

　　representative:

　　日期：

　　date:

英文合同篇2

　　The buyer: the seller: ____________ ____________

　　Address: Address: ____________ ____________

　　Tel: ____________ Tel: ____________

　　Fax: Fax: ____________ ____________

　　Contact: Contact: ____________ ____________

　　The sale of the friendly negotiation of both parties, the buyer seller commissioned processing production ________ mould Co ______ set. The two sides reached the following processing agreement

　　Basic mould of die:

　　Product name serial number part name point number (mold type) mold single price (RMB yuan) delivery condition

　　Total price: (including 17% VAT)

　　The above set of mould material: _____________________

　　(the above mold materials are provided by the seller).

　　I. The rights and responsibilities of the two parties:

　　Buyer's responsibility and rights are as follows:

　　1. the buyer is responsible for the delivery of the R & D requirements and plans of the seller's project, and provides the sales forecast as far as possible.

　　2. the buyer is responsible for the delivery of the product design drawings and other related technical information required by the seller to the seller and the technical support.

　　3., the buyer has the sole right to interpret the product design drawings and related technical data delivered to the seller. When there is ambiguity, the Seller shall consult the buyer's opinion and confirm it by the buyer.

　　4. after the seller completes the design and manufacture of the mould, the buyer will go to the seller's site to verify the mold, or to provide the product sample to the buyer for confirmation and confirmation by the seller. The moulds referred to in this contract include the mould of the product itself and the fixture and mould needed for the subsequent production.

　　The rights and responsibilities of the seller are as follows:

　　1. the seller is responsible for the design and manufacture of the moulds according to the product design drawings and other related technical information provided by the buyer.

　　Be responsible for completing the mold according to the buyer's design requirements in accordance with the stipulations of the contract.

　　2. the Seller shall be responsible for providing timely certification and sample test, trial production of desired products. At the same time the seller must provide the details of the related products.

　　The detailed test report is for the buyer's confirmation. In case of repair / modification, the test report is also attached at the same time.

　　The buyer does not bear any responsibility.

　　1.5 the Seller shall give the buyer the corresponding compensation in the form of the buyer's approval as the seller causes the buyer to spend the labor and cost outside the normal technical support as a result of the seller's cause.

　　2. the progress of the model:

　　2.1 the seller after the receipt of the buyer after the confirmation of product drawing, which began to enter the mold design and production stage, open cycle for ________ days

　　2.2 due to buyer's cause the delay of mold making progress is not calculated.

　　2.3 if the seller's mold making process and other mistakes lead to the failure of the mold to be accepted and the buyer is in urgent need of production.

　　At the same time, the production should be arranged with the existing mold, and the die should be reopened according to the requirements of the drawings and samples.

　　3. mode of payment:

　　Party B agrees that Party A will pay the payment as follows.

　　3.1 separate settlement: Monthly knot, 60 days after the opening of the ticket, open 17% VAT invoices.

　　3.1.1 of the total amount of the contract manufacturing batch mould (including VAT) for RMB _________ yuan (RMB ________ yuan), the buyer to pay the total amount of _____% mold, mold ___% residual cost allocation in the first 50K products, if the number of orders less than 50K, the buyer shall supply the seller after the unamortized tooling cost.

　　3.1.2 from the two sides after the signing of the contract, the seller to provide value-added tax invoices (mold total ____%), the buyer within twenty working days of payment.

　　4. product order: only after the quality acceptance of the product sample is qualified and the buyer's written confirmation, the seller may accept the order of the third party authorized by the buyer or the buyer. The order contract signed by third parties authorized by the buyer with the buyer's seller is subject to this contract.

　　Four, product quality assurance

　　After the seller has completed the mold, the Seller agrees to guarantee the quality of the product in accordance with the buyer's quality standard (the first confirmation report).

　　The buyer reserves the right to modify the content of the quality standard in accordance with the actual needs.

　　Five. The ownership of the mold

　　1. the ownership of all moulds and clamping fixtures and their assembly drawings and parts drawings (including 2D and 3D) involved in the contract shall be owned by the buyer, and the Seller shall not interfere with the buyer's disposition of the molds. If the seller is responsible for the custody of the seller, the Seller shall not supply the mould to the third party without the buyer's consent, otherwise the buyer shall have the right to ask the seller to return the mold fee and compensate for the loss.

　　2. when the buyer pays the mold cost, the seller must cooperate with the buyer or the third party designated by the buyer to transfer the inspection and accept the replacement of the die from the seller's place, and will replace the worn parts at the expense of itself, so as to ensure the restart of production. The seller is obliged to assemble, rust and pack the moulds and send it to the place designated by the buyer. All mold assembly drawings and part drawings (including 2D and 3D) and all clamping devices must be transferred to the buyer at the same time.

　　3., during the process of mold transfer, such as the improper assembly, rust prevention or packaging of the seller, it will cause damage to the mold, and all direct and indirect losses arising therefrom shall be borne by the seller.

　　Six, mold maintenance

　　1., the Seller guarantees the service life of the mould 500 thousand times, and the seller is responsible for free maintenance during this period. If the mold is not used during the service life, the Seller shall be responsible for changing or re opening the mold and taking the corresponding cost.

　　2. the seller should die changes, maintenance and repairs in a timely manner and register, whether such a modification, maintenance and repair are

　　The buyer made it. If the buyer is to ask the relevant technical details or evidence, the buyer may register with the time without notice. The Seller shall give the buyer a copy of the record once every three months. The seller should take the initiative to complete this task on a regular basis without the buyer's request.

　　Six. Intellectual property rights

　　The product and the buyer 1. involved in this contract to provide design drawings and other information in the intellectual property is owned by the buyer, the buyer without permission, the Seller shall not disclose to any company or individual, otherwise all the losses resulting from the seller; the buyer only agreed to all data and information provided by the seller by the buyer the purpose of this contract based on the,

　　2. the Seller agrees to the design drawings will not be provided by the buyer and other data or information for the purpose of non contract other than the seller or the buyer has the right to pursue responsibility; without written permission from the buyer, the Seller shall not in publications, advertising or other written and oral form to the seller to provide or have provided any data and information.

　　3., without the buyer's license, it is strictly prohibited for the seller to use this mould to supply other customers other than the buyer or the buyer's designated customer, otherwise all direct and indirect losses arising from it shall be the seller's responsibility.

　　4. other undisclosed matters of confidentiality are carried out in accordance with the "confidentiality agreement" signed by the buyer and the seller.

　　Seven. Liability for breach of contract

　　1. the Seller shall be liable for breach of contract if the seller fails to complete the mold making and sample delivery according to the progress of each stage specified in the 2.1. The Seller shall pay the buyer a fine of 2% of the total amount of this contract at a time of one day of delay. The amount of the penalty is not more than the total amount of the contract.

　　2., if the seller's cause causes the seller's quality to be supplied to the buyer can't meet the buyer's requirements, and the other materials will be lost and scrapped during the assembly process, the seller will fully compensate for the loss and scrap materials and the resulting artificial / stop line costs. The two parties may sign separately the raw material for production.

　　3. the quality and progress of the product provided to the buyer by the seller for the seller's cause can not reach the buyer.

　　Place)

　　3. when the mold is certified by the buyer, the seller is responsible for the seal of the mold. If the buyer agrees that the seller is responsible for the subsequent processing and production of the products, the Seller shall be responsible for the repair and maintenance of the moulds, and the Seller shall make the batch production according to the order of the third party authorized by the buyer or the buyer.

　　4. for all the molds produced by the buyer, the Seller shall provide the buyer with detailed design drawings. All drawings must be made in AutoCAD or pro-eng (pro-el2) and must be transmitted to the buyer in electronic form before the mold opening for approval.

　　Two. Technical terms:

　　1. repair and maintenance of the mold: the seller is responsible for the repair and maintenance of the mold during the production process.

　　2., after no dispute between the two sides, the buyer will provide the product design drawings and related technical information to the seller, and send the engineer to the seller's technical exchange or the seller send the engineer to the buyer for technical communication. The product drawings and technical requirements list is attached to Annex 1.

　　3. the seller promised to use the quality requirements of the mold for the system to produce products to the buyer

　　4. the seller promised to use the mold for the system to produce the product can reach the seller's delivery capacity:

　　Nissan energy: _______k, monthly capacity: ______k

　　5. the seller promises that all the moulds involved in this contract can be reached to 400 thousand times.

　　6., without the buyer's permission, it is strictly prohibited for the seller to contract the whole part of the contract involved in the contract to other companies for processing. Otherwise, the Seller shall be liable for breach of contract in accordance with the breach clause of the contract as a breach of contract.

　　Three. The terms of business:

　　1. mold price:

　　1.1 after negotiation between the two parties, the seller will provide the final offer of the mould approved by the buyer and sign the price confirmation as an indispensable part of the contract.

　　The total amount of 1.2 contract (including VAT mold ____%) rmb_______.

　　1.3 the total cost of the price of the mold contains the following expenses, and the Seller shall not ask the buyer for the following reasons:

　　1.3.1 the cost of all the fixtures and tools required by the seller for the molding / two processing / assembly of the product;

　　1.3.2 the seller, according to the contract, carries out the cost of material, equipment and manpower for mould design, test mould.

　　1.3.3 the cost of the sample (800 sets) provided by the seller to the buyer for the certification of the mold and product;

　　1.3.4 the seller is the cost of the die vulnerable spare parts to ensure the normal production of the mold;

　　1.3.5 the cost of the related tools and tools for other processes that are prepared for the normal production of the product.

　　1.4 when the written request of the buyer the seller according to the change of the product design for the mould modification, if the mould modification is relatively simple, including less mold material changes and other simple changes from the mold, the seller to the buyer without charges; if the modification is complex, great influence on the whole structure of the mold, then the seller according to the modified working hours for mold to the buyer by the buyer offer, the corresponding mold modification cost. The buyer shall not bear any responsibility for the repair or modification of the mold due to the seller's reason, due to the failure of the mold to meet the buyer's requirements.

　　1.5 by the seller to the buyer's manual and cost technical support from the normal cost, the Seller shall give the buyer recognized the way the corresponding compensation.

　　2. the progress of the model:

　　2.1 after the seller has received the product drawing file after the buyer's confirmation, that is,

　　The cost of artificial / stop line formation. The two parties may sign separately the raw material for production.

　　3. if the seller has caused the seller to the buyer of the product quality and schedule is not up to the requirements of the buyer, the buyer and customer missed the best time to market, or the buyer was forced to cancel the project, so that the buyer and its customers suffer serious losses and loss of material research, in addition to the seller to refund all previous the buyer to pay the purchase price, depending on the actual situation of the seller also bear the buyer direct and indirect economic losses.

　　4., if the seller is unable to resist force, including the war, fire, strike, and other force majeure caused by Chinese law, the buyer will allow the buyer to dismiss it. The Seller shall notify the buyer in written form within 24 hours after the occurrence of the force majeure, and the seller is obliged to take all necessary measures to deliver the goods as soon as possible. If the force majeure continues for more than 2 weeks, the buyer has the right to cancel this contract.

　　5. other unfinished matters: implemented in accordance with the economic contract law.

　　Eight. Dispute settlement

　　Any dispute arising from the execution of this contract shall be settled through friendly negotiation first. If no negotiation can be reached within 30 days, either party can submit the dispute to the municipal court.

　　The parties to this contract shall be strictly enforced. If one party fails to perform the contract in the cause of the contract, the party must ask for the consent of the other party two weeks in advance, and the contract shall be terminated.

　　The buyer: the seller: ____________ ____________

　　Representative: Representative: ___________ ____________

英文合同篇3

　　NECESSARY TERMS OF ENGLISH CONTRACT

　　1.前言 Preamble

　　一份標準英文合同通�？梢苑譃榍把裕≒reamble）、正文（Operative part）、附錄（Schedule）及證明部分即結束詞（Attestation）四大部分組成。前言（Preamble）由“Parties”及“Recitals”兩部分組成。

　　“Parties”為必備條款，在很多時候稱為“commencement”即合同的開場白，主要介紹合同各方的名稱或姓名、注冊地及地址、郵編及在合同中的簡稱。當然，并不是所有的合同都要詳細介紹以上諸要素，在許多簡單合同中，只是提一下各方的名稱。

　　I. 以下為“Parties”的常用表達方式：

　　1. This Agreement is entered into by and between ____ and ____. 本協議由以下雙方____和___ 簽署。

　　2. This Agreement is entered into by and between ____ (hereinafter referred to as____) and ____ (hereinafter referred to as "_____"), whereby it is agreed as follows:

　　本協議由以下雙方____（以下簡稱____）和_____（以下簡稱___）簽署，達成如下協議：

　　注：在很多合同中，這部分加入簽約事由，如：

　　This Agreement is entered into through friendly negotiations between _____ Co.

　　(hereinafter referred to as the “Party A”) and _____ Co. (hereinafter referred to as the “Party B”) based on equal

　　ity and mutual benefit to develop business on the terms and conditions set forth below:

　　本協議由_____（以下稱為甲方）和____（以下稱為乙方）為發展業務在平等互利的基礎上簽訂，其條款如下：

　　This Agreement is entered into between _____ (hereinafter referred to as "Company"), and ______, (hereinafter referred to as "Employee") pursuant to paragraph VIII(2) of the Employee Handbook, whereby it is agreed as follows:

　　本“協議”由_____（以下簡稱“公司”）與_____（以下簡稱“雇員”）根據“雇員手冊”第VIII(2)款簽署，“協議”內容如下：

　　II. 以下為標準的“Parties”條款：

　　3. This Agreement is made and entered into this _____th day of _____ in the year of ____ by and between ______, a company duly organized and existing under and by virtue of the laws of ______, with its principal place of business at _____ (hereinafter referred to as “_____”), and ______, a company duly organized and existing under and by virtue of the laws of _____, with its principal place of business at _____ (hereinafter referred to as “_____”), whereby it is agreed as follows:

　　本合約由______，在_____法律之下并憑該等法律正式組織并存在的公司，其主要營業地點在______（下稱_____），與_____，在_____法律之下并憑該等法律正式組織并存在的公司，其主要營業地點______（下稱代理人），于_____日簽訂和締結，協議如下：

　　III. “Recitals”由數個以"Whereas"字樣開頭的句子所組合而成（這些句子俗稱為“Whereas Clauses”），表示當事人乃是在基于對這些事實（例如訂約的目的、背景來由等）的共同認識，訂立此合約。

　　4. This Agreement is made and entered into this _____ day of _____ in the year of ____ by and between _______, a company duly organized and existing under and by virtue of the laws of ______, with its principal place of business at ______ (hereinafter referred to as “_____”), and ______, a company duly organized and existing under and by virtue of the laws of ______, with its principal place of business at ______ (hereinafter referred

　　to as “_____”)

　　WITNESSED

　　WHEREAS, NOW THEREFORE, the parties hereto agree as follows:

　　本合約由_____，在_____法律之下并憑該等法律正式組織并存在的公司，其主要營業地點在______（下稱_____）（或下稱供應商），與_______，在_____法律之下并憑該等法律正式組織并存在的公司，其主要營業地點_

　　鑒于

　　因此，雙方當事人達成以下協議：

　　注：WITNESSED可以用WITHNESSTH、WITHNESSTH THAT等來代替。

　　IV. 在很多美國常用合同中，在很多情況下直接用RECITALS引導數個陳述語句或“Whereas Clauses”。下面為一個資產購買協議實例：

　　This ASSET PURCHASE AGREEMENT (the "Agreement") is made and entered into as of May 19, 1997 by and among AAA, a Delaware corporation ("AAA"), BBB, a Delaware corporation and wholly-owned subsidiary of AAA ("Buyer"), CCC ("Summit"), and DDD, an Oregon corporation and wholly-owned subsidiary of Summit ("Seller").

　　RECITALS

　　A. The Boards of Directors of each of Summit, Seller, AAA and Buyer believe it is in the best interests of each company and their respective security holders that Buyer acquire certain listed assets and assume certain listed liabilities of Seller (the "Acquisition").

　　B. On the date hereof, Buyer has executed a $2,000,000 irrevocable purchase order to purchase 400 time-based licenses for Summit's Visual HDL interfaces for Visual Test bench ("VTB") software on AAA's standard form of purchase order, which is payable within five (5) business days after the date hereof.

　　NOW, THEREFORE, in consideration of the covenants, promises and representations set forth herein, and for other good and valuable consideration, the parties agree as follows:

　　2.定義 Definition

　　在正文（Habendum）部分，通常第一章為定義（Definitions）部分。

　　定義條款即對合同中涉及的術語及名詞作出限定、解釋的條款。它可以散見于合同各個部分，但對于一些大型的、重要的合同，通常將其置于第一章。

　　I. 常見的定義語句常用mean, refer to, be construed as, include等來表達。如：

　　1. "Territory" means the United States of America.“銷售地區”是指美利堅合眾國。

　　2. “Commencement date” shall mean the date of signing this agreement by the last signing party hereto.

　　“協議生效日”是指本“協議”最后簽字的一方簽署本“協議”的'日期。

　　3. The “agreement” herein referred to shall mean this agreement of agency by entrustment.

　　“協議”在這里是指本委托代理協議。

　　4. “Code” shall refer to the current and applicable Internal Revenue Code.

　　“法”是指當前可用的國內稅收法。

　　5. Reference to any statutory provision shall be construed as a reference to the same as it may have been, or may from time be, amended, modified or re-enacted.

　　引用法律規定理解為引用其本身外，還包括其修訂、修正或重新實施案。

　　6. "Expenses" include costs, charges and expenses of every description. “費用”包括各種形式的金錢支出。

　　II. 還有一類特殊的定義語句，即對于「單、復數」及「陰、陽性」名詞的范圍定義。通常都是用include來表達：

　　1. "Stock Certificate" includes "stock certificate" and "stock certificates".

　　合同中的“股票”，包括單數與復數。

　　2. "He" includes "he" and "she".

　　合同中的“他”，包括“他”與“她”。

　　3. Words using the singular or plural number also include the plural or singular number.

　　采用單數或復數的單詞也包括復數或單數。

　　III. 定義語句中，有時需限定范圍。而通常用得最多的是：“for the purpose of ”及“in relation to”某概念的定義條款，如果適用范圍僅限于合同的“特定部份”，可以用“for the purpose of ”來為定義條款起頭。而如果定義條款是針對合同的“特定概念”，就用“in relation to”來界定。如下例：

　　1. For the purpose of this Agreement, "Products" means all types of the machineries manufactured by Manufacturer as are specified in Attachment

　　A hereto.

　　本協議所稱的“產品”，指制造人所制造如附件A表列之各式機器。

　　2. "Address" means－

　　(a) 就自然人而言in relation to an individual, his usual residential or business address; and

　　(b) in relation to a corporation, its registered or principal office in the Republic of China.

　　“地址”就自然人而言，指通常之居所或工作場所；就公司而言，指位于中華人民共和國之注冊所在地或主營業所。

　　IV. 在定義條款中，在定義語句前有時會加上一些陳述語句來引導，如：

英文合同篇4

　　合同 CONTRACT

　　日期：合同號碼：

　　Date： Contract No.：

　　買方：（The Buyers）賣方：（The Sellers）

　　茲經買賣雙方同意按照以下條款由買方購進，賣方售出以下商品：

　　This contract is made by and between the Buyers and the Sellers； whereby the Buyers agree to buy and the Sellers agree to sell the under-mentioned goods subject to the terms and conditions as stipulated hereinafter：

　�。�1）商品名稱：

　　Name of Commodity：

　　（2）數 量：

　　Quantity：

　�。�3）單價：

　　Unit price：

　　（4）總值：

　　Total Value：

　�。�5）包裝：

　　Packing：

　　（6）生產國別：

　　Country of Origin ：

　�。�7）支付條款：

　　Terms of Payment：

　�。�8）保險：

　　insurance：

　�。�9）裝運期限：

　　Time of Shipment：

　�。�10）起運港：

　　Port of Lading：

　�。�11）目的港：

　　Port of Destination：

　�。�12）索賠：在貨到目的口岸45天內如發現貨物品質，規格和數量與合同不附，除屬保險公司或船方

　　責任外，買方有權憑中國商檢出具的檢驗證書或有關文件向賣方索賠換貨或賠款。

　　Claims：

　　Within 45 days after the arrival of the goods at the destination， should the quality， Specifications or quantity be found not in conformity with the stipulations of the contract except those claims for which the insurance company or the owners of the vessel are liable， the Buyers shall， have the right on the strength of the inspection certificate issued by the C.C.I.C and the relative documents to claim for compensation to the Sellers

　�。�13）不可抗力：由于人力不可抗力的原由發生在制造，裝載或運輸?shù)倪^程中導致賣方延期交貨或不

　　能交貨者，賣方可免除責任，在不可抗力發生后，賣方須立即電告買方及在14天內以

　　空郵方式向買方提供事故發生的.證明文件，在上述情況下，賣方仍須負責采取措施盡

　　快發貨。

　　Force Majeure ：

　　The sellers shall not be held responsible for the delay in shipment or non-deli-very of the goods due to Force Majeure， which might occur during the process of manufacturing or in the course of loading or transit. The sellers shall advise the Buyers immediately of the occurrence mentioned above the within fourteen days there after . the Sellers shall send by airmail to the Buyers for their acceptancea certificate of the accident. Under such circumstances the Sellers， however， are still under the obligation to take all necessary measures to hasten the deliveryof the goods.

　�。�14）仲裁：凡有關執行合同所發生的一切爭議應通過友好協商解決，如協商不能解決，則將分歧提

　　交中國國際貿易促進委員會按有關仲裁程序進行仲裁，仲裁將是終局的，雙方均受其約

　　束，仲裁費用由敗訴方承擔。

　　Arbitration ：

　　All disputes in connection with the execution of this Contract shall be settled friendly through negotiation. in case no settlement can be reached， the case then may be submitted for arbitration to the Arbitration Commission of the China Council for the Promotion of International Trade in accordance with the Provisional Rules of Procedure promulgated by the said Arbitration Commission . the Arbitration committee shall be final and binding upon both parties. and the Arbitration fee shall be borne by the losing parties.

　　買方：賣方：

　�。ㄊ跈嗪炞郑� （授權簽字）

英文合同篇5

　　contract for equipment sales and technology licensing

　　contract no. ____________________

　　this contract (hereinafter referred to as the “contract”) is made and entered into as of ________ (the date of signature ) in ________ (the place of signature) through friendly negotiation by and between _____________, a company incorporated and existing under the laws of ____________ with its registered address at _________________________________, and with its principal place of business at _________________________________ (hereinafter referred to as the “buyer”), and ____________________, a company incorporated and existing under the laws of the people’s republic of china with its registered address at _________________________________, and with its principal place of business at _________________________________(hereinafter referred to as the “seller”).

　　whereas, the buyer desires to engage the seller to provide the equipment, related design, technical documentation, technical service and technical training and to obtain from the seller a license of patent and/or know-how in relation to the erection, test run, commissioning, performance test，operation and maintenance for the equipment, as well as manufacture of the contract products. now it is hereby mutually agreed as follows:

　　article 1 definitions

　　1.1 “acceptance ”means the buyer accepted the equipment in accordance with article 11.5.

　　1.2 “commissioning” means the operation of the equipment in accordance with article 11.4 for the purpose of carrying out performance test.

　　1.3 “contract” means this contract signed by and between the buyer and the seller, including appendices attached which shall form an integral part of this contract.

　　1.4 “contract products” refers to all types of the products manufactured with patent and/or know-how under the contract, details of which are specified in appendix 1.

　　1.5 “destination airport” refers to _____________airport.

　　1.6 “effective date of the contract” means the date when the contract enters into force upon fulfillment of all the conditions stated in article 18.1.

　　1.7 “equipment” means the equipment, machinery, instruments, spare parts and materials supplied by the seller as listed in appendix 3.

　　1.8 “erection” means placing the equipment to the positions according to the design drawings, and connecting it with relevant equipment and utilities.

　　1.9 “improvement” refers to new findings and/or modifications made in the validity period of the contract by either party on patent and/or know-how in the form of new designs, formulas, recipes, ingredients, indices, parameters, calculations, or any other indicators.

英文合同篇6

　　英文合同中使用的大量長句，主要分為三大類：簡單長句、復合長句和并列長句。在翻譯這些長句時，首先要正確理解各種相關成分的邏輯關系，然后再適當切分，理出句子的主干成分。最后再按漢語表達習慣，變動語序，重新組合。這樣才能連貫、準確、清晰地予以表達。今天我們就先說一下簡單長句和并列長句的翻譯。

　　簡單長句及其翻譯

　　在翻譯英文商務合同中的簡單長句時，首先要正確理解各種相關成分的邏輯關系;然后再適當切分，理出句子的主干成分，翻譯時以句子的主干為主導;最后再按漢語表達習慣，變動語序，重新組合。這樣才能連貫、準確、清晰地予以表達。下面舉三個簡單長句翻譯的例子來說明：

　　1.The Buyers may，within 15 days after arrival of the goods at the destination，lodge a claim against the sellers for short-weight being supported by Inspection Certificate issued by a reputable public surveyor.

　　這是一個簡單長句，其主干為The Buyers may…lodge a claim…。

　　修飾謂語動詞的狀語有三個：

　　a. 分別表示時間within 15 days after arrival of the goods at the destination

　　b. 方式being supported by Inspection Certificate issued by a reputable public surveyor和

　　c. 目的for short-weight

　　而且狀語中還有狀語，作定語的分詞issued還有自己的狀語by a reputable public surveyor。

　　眾多狀語，盡管在英語中的位置十分靈活，然而按照漢語的行文規范，方式狀語一般應位于動詞之前;而有些狀語在譯文中可以靈活處理，例如本句中的時間狀語，可以提前至句首。因此，上句可譯成：貨物抵達目的港15天內，買方可以憑有信譽的.公共檢驗員出示的檢驗證明向賣方提出短重索賠。

　　2. Within 30 days after the signing and coming into effect of this contract，the Buyer shall proceed to pay the price for the goods to the Seller by opening an irrevocable L/C for the full amount of USD30,000 in favor of the Seller through a bank at export port.

　　此句的主干為…the Buyer shall proceed to pay the price…to the Seller，其中含有一個時間狀語within 30 days after the signing and coming into effect of this contract。

　　從語用的角度來看，商務合同中許多時間狀語表示的是某一締約方必須在何時何地承擔某一義務和享有某一種權利，即時效性。因此整個句子的重心不是句子的動詞，而是發生動作的時間。

　　在譯成中文時，為了突出行為的時效性，時間狀語應盡量靠近表示義務責任的關鍵詞“須”。此句中還含有一個較為復雜的方式狀語by opening an irrevocable L/C…，其中含有三個介詞短語作定語修飾an irrevocable L/C。按照漢語的行文規范，方式狀語一般應位于動詞之前。

　　此外，若動詞同時帶有時間狀語和方式狀語時，英文的通常順序是方式在前，時間在后，而漢語卻正好與之相反，為方式在后，時間在前。因此本句可譯成：

　　買方須于本合同簽字并生效后30天內通過出口地銀行開立以賣方為收益人的不可撤銷信用證支付全部貨款計30 000美元。

　　3. The Equipment and Material shall be carefully and properly packed in the best and stable condition according to the figures and characteristics of the Equipment and Material so as to withstand long-distance sea and inland transportation and numerous handlings.

　　此句的句子結構并不復雜但包含一個較為復雜的方式狀語。從語用特征的角度來看，方式狀語通常都是規定性的，其作用是規定合約方履行某項義務必須采取的方式或手段，在合同的語言環境下，即使有關締約方履行了合同規定的義務，但若其履行義務的方式與合同規定的方式不符，乃構成違約。因此，方式狀語的作用通常都是比較重要的。本句可譯成：

　　設備和原料須根據其形狀和特點以完善而牢固的方式精心妥當?shù)匕b，包裝須適合于長途海、陸運輸，能經受多次裝卸。

　　并列長句及其翻譯

　　由于撰寫合同時不能遺漏任何可能情況，所以英文商務合同中往往有大量并列成分。這些并列成分包括并列的詞、短語以及從句。從語用角度看，并列的平行結構使合同的句式平衡，表意完整。在翻譯由兩個或兩個以上的并列單句構成的復雜長句時可以采用分句譯法。并列長句的分句之間的語義關系比較松散，因此翻譯時可以斷開，分解成單句獨立存在。例如：

　　The Buyer shall have the right to claim against the Seller for compensation of losses within 60 days after arrival of the goods at the port of destination，should the quality of the goods be found not in conformity with the specifications stipulated in the Contract after re-inspection by the China Commodity Inspection Bureau and the Buyer shall have the right to claim against the Sellers for compensation of short-weight within 60 days after arrival of the goods at the port of destination，should the weight be found not in conformity with that stipulated in the Bill of Lading after re-inspection by the CCIB.

　　此句由兩個結構相同的并列分句組成，均為主句在前，條件狀語在后，在兩個條件狀語中均含有時間狀語，此外，兩個并列分句中也都含有時間狀語，均為within 60 days after arrival of the goods at the port of destination，譯成中文時，條件狀語應分別置于主句之前，而所有的時間狀語均放在各自修飾的動詞的前面。同時，為了符合漢語句式較短的特點，可以將兩個并列分句斷開，分解成兩個單句，即譯成：

　　若貨物經中國商品檢驗局復檢后發現質量與本合同之規定不符，買方有權于貨物抵達目的港后的60天內向賣方提出索賠。若經中國商品檢驗局復檢發現貨物質量與提單所示重量不符，買方有權于貨物抵達目的港后的60天內向賣方提出短重索賠。

【英文合同】相關文章：

英文合同七篇05-04